60S 100A Integrated BMS 192V Battery Management System Compatible
With Victron Deye Goodwe Growatt Atess Sofar Inverter
Product Description:
We offer a single piece of 75S50A integrated BMS(Battery Management
System) that integrates both master and slave functions.
This BMS features advanced monitoring, control and safety
protection for Li-ion batteries, as well as superior performance
when compared to competitors.Our BMS ensures the safety and optimal performance of your
high-voltage energy storage system. Elevate your high-voltage
energy storage capabilities with GCE.
The Benefits of integrating this particular BMS include; improved
battery performance, increased safety of electronic components and
simplified system setup.
GCE offers advanced protection features as well as independent
insulation detection and accurate estimation of both SOC (state of
charge) and SOH (state of health). With our BMS (battery management
system), you can stay in control with real-time detection and fault
diagnosis. Not only that, the system is also compatible with popular inverter brands.
Features:
● The case-type all-in-one integrated BMS is composed of BMS main
control board, BMU sampling board, high voltage board, switching power supply, Hall
sensor, DC contactor, micro-break switch, power connection terminal, structural box, and wiring
harness. The most striking characteristic of the BMS is combining the main control board,
sampling board, and other power devices integrated into one, keeping the system as a secondary
structure. It has the characteristics of compact structure, flexible installation and low
cost. It is suitable for use with larger capacity batteries, such as 50-100ah batteries, and the
battery module and BMS are installed separately.
● Especically suitable for off-grid solar PV energy storage
applications where there is no communication protocol in BMS and inverter;
● Each 15S is a battery collection unit, that is total of 4
collection units in a 60S batteries; total 5 collection units in a 75S batteries;
● Each 15S coming with 3 temperature acquisition probe, so 60S
total 12 temperature acquisition probe; 75S total 15 temperature acquisition probe;
● Hall sensor is used for current acquisition, which is safe and
reliable, no heating;
● SOC estimation error ≤5%;
● 3-digit address dial to set BMS address;
● 2-channel relay dry contact output;
● 4-channel contactor expansion and auxiliary contact detection;
● Provide host computer software, which is convenient for customers
to debug the battery system, and can also modify system parameters through the host
computer;
● Support parallel use (maximum 7 set in parallel);
Technical Parameters:
Product Name | Integrated BMS(master slave together in one) |
Model no. | RBMS07S60S100A |
System voltage range | 120 - 228 V DC |
Startup mode | DC start (optional AC and DC starter) |
Number of battery strings | 60 S(4 x 15 S) |
Balance | Balance type | Passive resistance equalization |
| Balanced current | 100mA ± 10mA(Single cell 3.4V ) |
Temperature Sampling | Numbers | 12 Battery temperature(4*3) |
| Sampling accuracy | ± 2℃ |
Voltage Sampling | Sampling accuracy | Single cell ±20mV |
SOC | ≤5% |
Communication mode | CAN: 1 channel (communication with PCs / UPS)
RS485: 1 channel (communication with upper computer / PCS / UPS)
Bluetooth: optional (android app available)
GPRS: optional, |
Display mode | 6-digit LED indicator, including 1-bit fault indication, 1-bit
operation indication, 4-bit SOC power indication
HMI display: optional |
Hall sensor specifications | 50A/100A |
Maximum load of power components | Steady-state:100A
transient state:150A/10S( Adjustable) |
Alarm level | 1 Level |
Protection level | 2 two levels
Level 1 cut off charge / discharge
Level 2 micro cut-off switch, system power down |
Operating Temperature | Charging : －10～75℃
Discharging : -20 to 75℃
Storage : -40 to +75℃ |
Applications:
Home storage is becoming increasingly popular for those homeowners looking for
an intimate, personalized energy solution. Island off-grid energy storage, the recommended form of home storage, provides freedom from
dependence on the power grid. The system is composed of renewable
energy sources such as solar and wind and can provide power to
single or multiple loads. This system is ideal for buildings
located in locations where the power must remain on despite the
power grid being down.
Micro-grid applications are becoming increasingly common as individuals seek a solution
for powering underdeveloped areas of the world. These systems are
typically composed of multiple renewable energy sources such as
solar and wind and can provide power to communities with little to
no access to electricity. With micro-grids, communities can obtain
power without relying on the power grid, as the micro-grid provides
its own.
UPS systems are ideal for providing backup power to equipment. If the primary
source of power fails, the system can provide power back-ups for
critical equipment needed to function. These systems run on either
AC or DC power and can provide power for several hours until normal
power is restored.
Power System 220V DC power supply is ideal for powering large industrial and commercial equipment.
This system is designed to run on a higher voltage and provides
more power than a standard AC system. This is perfect for powering
large equipment such as motors and compressors.
Packing and Shipping:
Integrated BMS Packaging and Shipping
- Verify the items and quantity are correct.
- Package the items securely in a box.
- Label the box with product name, address, and contact information.
- Weigh the package to determine the shipping cost.
- Calculate the shipping cost and create a shipping label.
- Attach the label to the package.
- Ship the package via the selected shipping service.
- Follow up with customer to ensure the package was received.
FAQ:
- Q1: What is the brand name of the product?
- A1: The brand name of the product is GCE.
- Q2: What is the model number of the product?
- A2: The model number of the product is RBMS07S75S50A.
- Q3: What is the place of origin of the product?
- A3: The place of origin of the product is Changsha, China.
- Q4: What certifications does the product have?
- A4: The product has CE and UL certifications.
- Q5: How many pieces can I order as the minimum order quantity?
- A5: The minimum order quantity is 2 pieces.
- Q6:How to contact with you for more BMS information?
- A6:Please sent email to cara@hngce.com
