Safety Precautions

• Tools for installation and commissioning personnel must be insulated
• Insulation rubber gloves must be worn during the installation and maintenance. Wear goggles and insulating rubber Boots as the case may be to avoid the possible safety accidents.
• Installation, commissioning and maintenance of the thread metal generated in the process, such as dropped into the battery, be sure to use an insulating tool to remove, you can not be lingering debris.
• When maintenance is required, the main circuit breaker of the CBMS must be disconnected to cut off the connection of the battery pack to the PCS DC bus.
• According to project requirements, parameters such as charge and discharge current and charge and discharge voltage of the battery management system have been set during initial
• Document number installation and debugging. Parameters may not be changed without authorization. Otherwise, the battery life may be shortened, and more serious battery may be damaged Cause serious harm to safety accidents
• In case of fire around the energy storage cabinet, be sure to use dry powder fire extinguishers or fire extinguishing sand. Fire extinguishing with liquid may cause electric shock.
• If the system is not used for a long time, be sure to disconnect the main circuit breaker of the battery cabinet
• Try to avoid long-term use in the following working environment:
• Exceeds the temperature or humidity range specified in the specification
• Strong vibration or vulnerable to impact of the place
• Direct sunlight or near the heat source of the place
• Dust, corrosive substances, flammable, high salt spray place

CBMS Sample Drawing Of Standard Produsts

Our comapny

We are a company with many years experience in Battery Management Systems, making them work for our customers, ensuring that their systems are operating with greater efficiency and therefore benefit from optimum energy performance and increased comfort levels.

We utilise intelligent programming and our skilled engineering team are trained to understand how to achieve this.

No separate energy monitoring system or complex interface required.

BMS staff are very knowledgeable and approachable and can diagnose problems quickly. They are very professional in communication issues to us and our clients.